1.Flat trough boat:suitable for high- humidity materials. 2.V-trough boat:suitable for materials with less moisture. 3.Oval trough boat: suitable for materials in molten state. 4.Spherical trough boat: suitable for expensive materials such as gold and silver. 5.Narrow trough boat: this design can prevent evaporation material from sticking to the product type of filament clip molybdenum boat. 6.Aluminum steaming boat:the surface of the boat body is plated with a layer of alumina to help the evaporation boat resist the extremely corrosive material.

The raw material of evaporation boat is BN, TiB2, ALN ceramic powder.TiB2 is a project developed for 863 programs in our country, and is a new type of ceramic materials supported by high and new technologies in our country.BN and TiB2 are non-oxide high-tech engineering ceramics materials, which have attracted international attention and research in the past ten years.China’s key laboratory of information composite new technology has won the first prize of scientific and technological progress and the thrid prize of scientific and technologyical progress of bulding materials Bureau, and Ningxia Machinery Research institue has won the sponsorship of innovation fund od Ministry of Science and Technology.In terms of the three main powder sources used in the production of evaporation bas, he omestic research has been successful and there is no need to import them.Foreign market price is extremely expensive, such as TiB2 powder price of 200-300 dollars/kg. Please contact with me if you need these products by email danny.ng@soucua.com

1.The influence of spot welding head welding current: The influence of current on heat generation is greater than both resistance and time. Therefore, it is a parameter that must be strictly controlled during the welding process. The main reason for the current change is the fluctuation of the gird voltage and the change of the impedance of the secondary loop of the communication welding machine. The impedance change is due to a few changes in the shape of the loop or the introduction of different amounts of magnetic metal in the secondary loop. Regarding the DC welding machine, the secondary circuit impedance changes and has no obvious influence on the current. 2.The influence of welding time: In order to ensure the size of the nugget and the strength of the solder joint, the welding time and the welding current can make up for each other within a certain range. In order to obtain a certain strength of the solder joints , high current and short time(strong condition, also known as hard standard) can be selected, and small current and long time( week condition, also known as soft standard) can also be selected. Whether to choose a hard standard or a standard depends on the function, thickness of the metal and the power of the welding machine used. There are upper and lower limits for the current and time required for the metal of different functions and thicknesses of the spot welding head, which shall prevail when used. 3.The influence of the electrode pressure of the spot welding head: The electrode pressure has a significant effect on the total resistance R between the two electrodes. With the increase of the electrode pressure, R decreases significantly, but the increase of the welding current is not resulting reduction in heat production. Therefore , the strength of the solder joint always decreases as the welding pressure increases. The solution is to increase the welding current while increasing the welding pressure. 4.The influence of electrode shape and material function.