The technical characteristics of the new evaporation boat

The new evaporation boat has always technical characteristics:long service life; corrosion resistance, high temperature resistance, thermal vibration resistance, the new evaporation boat evaporates quickly,rising to 1450 degrees in 1-3 minutes, moreover, the temperature is repeated tens to hundreds of times, and it basically does not react with aluminum at 1450 degrees. Because it does not react with aluminum, it has a smooth appearance ans a large amount of evaporation.The new evaporation boat is mainly used in vacuum evaporation technology to melt aluminum, zinc sulfide and other containers.

1. The length of the clamping parts of the boat clamps at both ends of the evaporation boat should be the same, and ensure good electrical and mechanical touch to avoid extra heat on the boat clamps. Ensure that the temperature on both sides of the hull is the same to avoid twists ans turns of the full. Embed the evaporation boat in the graphite sheet and the boat holder.If the pressure is too high, it will cause the boat to crack.
2. It can maintain a certain inclination when loading, which is conducive to the flow of molten aluminum to the stern. This is important for increasing the diffusion area of liquid aluminum, increasing the life of the evaporation boat and improving the uniformity of the coating.The evaporation boat should stick to the horizontal surface in the horizontal direction.

3. When actually painting the aluminum wire should be sent to the 1/3-1/2 position of the boat. The operator should consider the factors that cause the aluminum wire to sag when the temperature of the evaporation boat is high.

4. Avoid touching the surface of the boat tank to avoid soiling, which will reduce the wettability of the surface of the boat tank to liquid aluminum.

5. After opening the package, avoid getting water on the surface of the boat.The boron nitride in the evaporation boat can easily absorb water, and the water vaporize and expands when heat, causing the boat to explode.

Many customers try to save the cost of consumables without lowering the quality, and the Shouchuang Hardware electronics Co.,Ltd is their reliable choice. We have a strictly controlled inspection department to ensure product quality. The Shouchuang Hardware electronics Co.,Ltd has rich experience in the design ans development of spot welding heads and Haba heads. It often helps customers solve design problems and has obtained a number of product patents.